What's New

  See our newly expanded section on our Biodiesel Production Capabilities

  KMPS cover story for Chemical Engineering Nov. 2004 issue on liquid-liquid extraction

  Directions to our facilities at KMPS

  Download presentation showing module installation through a building roof
       - MS PowerPoint presentation (approximately 0.9 MB)

  Download a PDF flyer all about KMPS

  Designing a Separations Process Without VLE Data
         - MS PowerPoint presentation (approximately 0.75 MB)

  Download electronic Inquiry Forms in PDF format
         - These forms can be printed out and faxed to us or filled out electronically and emailed.

Some Current Activities

• KMPS has recently completed construction and startup of a continuous high vacuum Orange Oil distillation system for a Southeast US flavor and fragrance manufacturer.

• Just completed an Ammonia recovery system for a Pacific Coast fuel producer from liquid uranium.

• KMPS supplied and successfully started up a two-process system in the same module to a large chemical manufacturer in the Midwest. One column is for separation of Ethyl Chloride from Dichloromethane. The other is for separation of Methylene Chloride from water.

• KMPS supplied and started up two large diameter KARR^® Reciprocating Plate extraction columns in Korea, which are operating above expectations. These glass lined columns are performing a combination of a hydrolysis reaction and inorganic acid extraction using water as the solvent.

• SCHEIBEL^® extraction column installed and successfully started up in a Midwest chemical plant. Column is used to recover an organic product from an aqueous feed stream using an aromatic solvent.

• KMPS delivered and installed two large diameter KARR^® extraction columns in separate chemical plants in mainland China. One column is for extraction of Carboxylic Acid from an aqueous feed stream, the other for extraction of contaminants from an effluent caustic stream.

• A large SCHEIBEL^® column was delivered to a plant in Central Europe for extraction of impurities from recycled motor oils.